TEL 8-2410WI

DC/DC Converter TEL 8WI Series, 8 Watt • Ultra compact 8 W converter in DIP-16 metal casing • Operating temperature range -40°C to +80°C • • • • Ultra wide 4:1 input range Built-in EN 55032 class A filter UL 62368-1 IEC 62368-1 Protection against short circuit The TEL 8WI series is a range of isolated 8 Watt converters which come in a very compact DIP-16 metal package. They offer an ultra wide 4:1 input voltage range and feature a high efficiency of up to 86% which allows an operation temperature of up to +70°C at full load and up to 80°C with 50% load. The converters have an internal input filter to comply with conducted emission EN 55032 class A. The TEL 8WI Series models are an economical solution for space critical and cost sensitive applications in instrumentation, IT and industrial electronics. 3-year product warranty Models Order Code Input Voltage Range TEL 8-2410WI TEL 8-2411WI TEL 8-2412WI TEL 8-2413WI TEL 8-2415WI TEL 8-2422WI TEL 8-2423WI TEL 8-4810WI TEL 8-4811WI TEL 8-4812WI TEL 8-4813WI TEL 8-4815WI TEL 8-4822WI TEL 8-4823WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 2'000 mA 1'600 mA 665 mA 535 mA 335 mA 335 mA 265 mA 2'000 mA 1'600 mA 665 mA 535 mA 335 mA 335 mA 265 mA September 20, 2023 Vnom Efficiency Imax –12 VDC –15 VDC 335 mA 265 mA –12 VDC –15 VDC 335 mA 265 mA typ. 78 % 82 % 85 % 85 % 86 % 85 % 86 % 78 % 81 % 85 % 85 % 86 % 86 % 86 % Page 1 / 4 TEL 8WI Series, 8 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter 10 mA typ. 8 mA typ. 390 mA typ. 195 mA typ. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 8 VDC typ. 16 VDC typ. (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - 20 MHz Bandwidth - single output 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Transient Response single output models: dual output models: single output models: dual output models: - Response Deviation - Response Time ±2% max. 0.8% max. 0.8% max. 1% max. 2% max. (Output 1) 2% max. (Output 2) 55 mVp-p max. 680 µF max. 680 µF max. 330 µF max. 330 µF max. 150 µF max. 150 / 150 µF max. 150 / 150 µF max. Not required ±0.02 %/K max. 35 ms typ. Continuous, Automatic recovery 150% typ. of Iout max. 5% max. (25% Load Step) 500 µs max. (25% Load Step) Safety Specifications Safety Standards EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/tel8wi PD 3 - IT / Multimedia Equipment - Certification Documents Pollution Degree EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EN 55032 class A (internal filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tel8wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TEL 8WI Series, 8 Watt EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 20 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A KY 220 µF EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 95% max. (non condensing) –40°C to +80°C +105°C max. –50°C to +125°C 5 %/K above 70°C See application note: www.tracopower.com/overview/tel8wi Natural convection (20 LFM) 5'000 m max. 315 - 390 kHz (PWM) 370 kHz typ. (PWM) Functional Insulation 1'500 VDC 1'800 VDC 1'000 MΩ min. 500 pF typ. 2'360'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Alu alloy, black anodized coating Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) DIP16 Lead-Free Wave Soldering 260°C / 10 s max. 6.1 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 2bc4a0a4-4551-4378-a002-fe9b5398a283 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tel8wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TEL 8WI Series, 8 Watt Outline Dimensions 23.8 (0.94) 7 8 BOTTOM VIEW 16 10 13.7 (0.54) 10.16 (0.400) 1 Pinout 9 Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 NC NC 8 NC Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin (Vcc) +Vin (Vcc) 15.24 (0.600) 2.54 1.77 3.0 (0.070) NC: Not connected (0.100) 3.8 Ø0.5 (Ø0.02) (0.15) 8.0 (0.31) (0.12) Dimensions in mm (inch) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) Pin diameter tolerances: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4